Go back to fronty page View most popular entries View latest additions Submit tutorials to UnixTutorials.info
UnixTutorials logo

Search results for Network Management And Monitoring With Hyperic HQ On Ubuntu 7.04

SuSe

Setting up yum on SUSE LINUX 10.0

Post date: October 16, 2005, 16:10 Category: System Views: 6157 Comments
Tutorial quote: Why should I use yum and not yast? Well, yast is nice, but has some disadvantages: It can#t check for gpg keys, you have to trust the mirrors you add. And, speaking about mirrors, yast has no real mirror management for one source. Especially in these times the most and best known SUSE mirrors are very slow or just closed down, so you have to add other sources in yast. But yast needs your clicks when a mirror is not reachable, and if you enter several sources just as mirrors, it checks every single source - that takes quite a long time!
A last reason (which is not important know because SUSE LINUX has a ugly workaround) is that yast is not able to handle packages for different architectures - it can only install packages for one architecture.
Ubuntu

Installing Ubuntu From A Windows System With Wubi

Post date: September 11, 2007, 22:09 Category: Installing Views: 3843 Comments
Tutorial quote: Wubi is an Ubuntu installer for Windows that lets you install and uninstall Ubuntu from a Windows desktop. Wubi adds an entry to the Windows boot menu which allows you to run Linux. Ubuntu is installed within a file in the Windows file system (a loopmounted partition), this file is seen by Ubuntu as a real hard disk. That way the hard drive does not have to be repartitioned before the Ubuntu installation. The resulting Ubuntu installation is a "real" Linux system, not just a virtual machine. Wubi makes it easy for Linux newbies to play around with Ubuntu.
Debian

How To Set Up A Load-Balanced MySQL Cluster

Post date: March 31, 2006, 19:03 Category: Software Views: 4394 Comments
Tutorial quote: This tutorial shows how to configure a MySQL 5 cluster with three nodes: two storage nodes and one management node. This cluster is load-balanced by a high-availability load balancer that in fact has two nodes that use the Ultra Monkey package which provides heartbeat (for checking if the other node is still alive) and ldirectord (to split up the requests to the nodes of the MySQL cluster).

In this document I use Debian Sarge for all nodes. Therefore the setup might differ a bit for other distributions. The MySQL version I use in this setup is 5.0.19. If you do not want to use MySQL 5, you can use MySQL 4.1 as well, although I haven't tested it.

This howto is meant as a practical guide; it does not cover the theoretical backgrounds. They are treated in a lot of other documents in the web.
Gentoo

Enterprise Volume Management System Mini How-To

Post date: April 13, 2005, 20:04 Category: System Views: 4388 Comments
Tutorial quote: Here is a rough write-up on how I installed Gentoo 1.4_rc1 on EVMS, with the exception of the root partition. If you choose so, see the EVMS Howto for instructions on how to mount your root file system on an EVMS volume. I felt the hassle of dealing with a EVMS (or LVM, for that matter) root outweighs its advantages.

This is a very basic setup I used for my laptop. I only needed it so I don't have to worry about getting the partition sizes right from the beginning and to be able to adjust them with ease in the future. I've been using LVM with success but I couldn't find a way to resize the volume group itself. This, the fact that afaik there is no support for LVM in kernel 2.5.x and a new laptop needing a fresh installation made me try EVMS.
Linux

Boot Linux Over HTTP With boot.kernel.org (BKO)

Post date: September 27, 2009, 09:09 Category: Miscellaneous Views: 4343 Comments
Tutorial quote: This tutorial shows how you can boot Linux over HTTP with boot.kernel.org (BKO). All that users need is Internet connectivity and a small program (gpxe) to boot the machine. This gpxe program provides network booting facility. BKO allows you to boot into the following distributions: Debian, Ubuntu, Damn Small Linux, Knoppix, Fedora. BKO provides gpxe images for USB sticks, CDs, and also for floppies, i.e., you can boot from a USB sticks, a CD, or a floppy.
Mandriva

Distributed Replicated Storage Across 4 Nodes With GlusterFS On Mandriva 2010.0

Post date: April 20, 2010, 12:04 Category: Installing Views: 4847 Comments
Tutorial quote: This tutorial shows how to combine four single storage servers (running Mandriva 2010.0) to a distributed replicated storage with GlusterFS. Nodes 1 and 2 (replication1) as well as 3 and 4 (replication2) will mirror each other, and replication1 and replication2 will be combined to one larger storage server (distribution). Basically, this is RAID10 over network. If you lose one server from replication1 and one from replication2, the distributed volume continues to work. The client system (Mandriva 2010.0 as well) will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86_64 servers with SATA-II RAID and Infiniband HBA.
Debian

Distributed Replicated Storage Across Four Nodes With GlusterFS On Debian Lenny

Post date: June 30, 2009, 11:06 Category: Installing Views: 4349 Comments
Tutorial quote: This tutorial shows how to combine four single storage servers (running Debian Lenny) to a distributed replicated storage with GlusterFS. Nodes 1 and 2 (replication1) as well as 3 and 4 (replication2) will mirror each other, and replication1 and replication2 will be combined to one larger storage server (distribution). Basically, this is RAID10 over network. If you lose one server from replication1 and one from replication2, the distributed volume continues to work. The client system (Debian Lenny as well) will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86-64 servers with SATA-II RAID and Infiniband HBA.
Debian

Running A File-, Print-, Proxy-, DHCP-, AND Time-Server For Small/Medium Enterprises

Post date: October 18, 2006, 18:10 Category: System Views: 4644 Comments
Tutorial quote: This article shows how to run a file-, print-, HTTP proxy- DHCP-, and time server for small and medium enterprises (SME) on one single Debian Sarge system. It is very easy to set up, and management is done with an easy-to-use web interface called eBox so once the system is set up, you can forget about the command line. eBox was developed to administrate advanced services for corporate networks, and it was created for Debian Sarge.
Linux

Prep for Tomorrow with an IPv6 Testbed

Post date: April 14, 2005, 12:04 Category: Network Views: 2876 Comments
Tutorial quote: Yes, friends, I am afraid you do have to start paying attention to IPv6 (Internet Protocol version 6). It's on its way, it's inevitable, and us ace network admins must learn to use it.
Ubuntu

Installing Ubuntu/Kubuntu Dapper Drake on a Single/Multi-Boot RAID System

Post date: February 8, 2007, 20:02 Category: Installing Views: 3751 Comments
Tutorial quote: This guide describes how to install Ubuntu (Ubuntu+GNOME) or Kubuntu (Ubuntu+KDE) 6.06.1 LTS (Dapper Drake) on a single or a multi-boot RAID system. It is meant as a variation of Ubuntu Wiki FakeRAID HowTo document, but digested and with minimum commentary. Its goal is to allow new Ubuntu users to complete an entire installation within 30 minutes, almost entirely by copy and paste.
Web-based applications and online marketing solutions - LumoLink