Go back to fronty page View most popular entries View latest additions Submit tutorials to UnixTutorials.info
UnixTutorials logo

Search results for Using ATA Over Ethernet On Debian Etch

Debian

Using ATA Over Ethernet On Debian Etch

Post date: October 17, 2007, 11:10 Category: Hardware Views: 6061 Comments
Tutorial quote: Imagine you have a machine with all of its disk full and another with unused gigabytes, and you do not want to move the data from one to the other. Why not use the second's disk on the first, you could do it with iSCSI, but you can do it with ATA over Ethernet (AoE) as well. It is the second method I will explain in this article. All of this was made with two computers running Debian Etch.
Debian

Using ATA Over Ethernet (AoE) On Debian Lenny (Initiator And Target)

Post date: March 15, 2009, 12:03 Category: Installing Views: 3459 Comments
Tutorial quote: This guide explains how you can set up an AoE target and an AoE initiator (client), both running Debian Lenny. AoE stands for "ATA over Ethernet" and is a storage area network (SAN) protocol which allows AoE initiators to use storage devices on the (remote) AoE target using normal ethernet cabling. "Remote" in this case means "inside the same LAN" because AoE is not routable outside a LAN (this is a major difference compared to iSCSI). To the AoE initiator, the remote storage looks like a normal, locally-attached hard drive.
Fedora

Using ATA Over Ethernet (AoE) On Fedora 10 (Initiator And Target)

Post date: June 2, 2009, 10:06 Category: Installing Views: 3399 Comments
Tutorial quote: This guide explains how you can set up an AoE target and an AoE initiator (client), both running Fedora 10. AoE stands for "ATA over Ethernet" and is a storage area network (SAN) protocol which allows AoE initiators to use storage devices on the (remote) AoE target using normal ethernet cabling. "Remote" in this case means "inside the same LAN" because AoE is not routable outside a LAN (this is a major difference compared to iSCSI). To the AoE initiator, the remote storage looks like a normal, locally-attached hard drive.
Debian

Ethernet Bonding Configuration in Debian

Post date: April 24, 2006, 19:04 Category: Network Views: 3764 Comments
Tutorial quote: Ethernet bonding refers to aggregating multiple ethernet channels together to form a single channel. This is primarily used for redundancy in ethernet paths or for load balancing. This page refers in particular to performing ethernet bonding under linux, and so does not limit itself to discussion of 802.3ad Trunk Aggregation.
Linux

Benchmarking Filesystems Part II

Post date: January 6, 2006, 22:01 Category: Benchmarks Views: 4696 Comments
Tutorial quote: After the last article was published, I have received more than a dozen requests for a second filesystem benchmark using the 2.6 kernel. Since that time, I have converted entirely to XFS for every Linux machine I use, so I may be a bit bias regarding the XFS filesystem. I tried to keep the hardware roughly the same. Instead of a Western Digital 250GB and Promise ATA/100 controller, I am now am using a Seagate 400GB and Maxtor ATA/133 Promise controller. The physical machine remains the same, there is an additional 664MB of swap and I am now running Debian Etch. In the previous article, I was running Slackware 9.1 with custom compiled filesystem utilities. I've added a small section in the beginning that shows the filesystem creation and mount time, I've also added a graph showing these new benchmarks. After the first round of benchmarks, I received a sleuth of e-mails asking for the raw numbers. The numbers are now included in tables at the end of this e-mail for both the last and current set of benchmarks.
Debian

Debian Etch And Xen From The Debian Repository

Post date: May 2, 2007, 22:05 Category: Installing Views: 2880 Comments
Tutorial quote: This guide provides step-by-step instructions on how to install Xen on an already working Debian Etch system. You can find all the software used here in the Etch repository, so no external files or compilation are needed.
Debian

Debian etch beta 3 graphical mode installation with screenshots

Post date: September 11, 2006, 16:09 Category: Installing Views: 2656 Comments
Tutorial quote: Debian etch beta3 installation using graphical interface this is really nice installation walkthrough with each step screenshots.This is new feature in debian upcoming release version called etch.This article contains nearly 50 images of this installation process.
Debian

HowTo upgrade from Debian Etch (4.0 ) to Lenny (5.0)

Post date: January 13, 2009, 13:01 Category: Desktop Views: 3040 Comments
Tutorial quote: Debian Lenny’s release is getting closer and closer and many people will want to upgrade their Debian Etch servers to Lenny.This is currently in testing so it is not recommended to use these instruction in production.This tutorial will explain how to upgrade from Debian Etch (4.0 ) to Lenny (5.0)
Debian

Installing Debian Etch From A Windows System With

Post date: September 27, 2007, 10:09 Category: Installing Views: 3117 Comments
Tutorial quote: Debian-Installer Loader is a Debian Etch installer for Windows which adds an entry to the boot menu that allows you to start the Debian installation. Unlike the Ubuntu installation with Wubi, real Debian partitions are created during the installation. In the end, you have a dual-boot system (Windows/Debian).
Debian

Enhanced Logging With rsyslog On Debian Etch And phpLogcon For Viewing

Post date: October 3, 2007, 11:10 Category: Miscellaneous Views: 5784 Comments
Tutorial quote: Well everybody knows the issues of reading and searching in log files. If you have more than one machine it even gets worse. This tutorial describes how to install and configure rsyslog on Debian Etch, but it can be adapted to other distributions.
Web-based applications and online marketing solutions - LumoLink