Go back to fronty page View most popular entries View latest additions Submit tutorials to UnixTutorials.info
UnixTutorials logo

Installing related tutorials

Debian

Striping Across Four Storage Nodes With GlusterFS On Debian Lenny

Post date: July 12, 2009, 10:07 Category: Installing Views: 3777 Comments
Tutorial quote: This tutorial shows how to do data striping (segmentation of logically sequential data, such as a single file, so that segments can be assigned to multiple physical devices in a round-robin fashion and thus written concurrently) across four single storage servers (running Debian Lenny) with GlusterFS. The client system (Debian Lenny as well) will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86-64 servers with SATA-II RAID and Infiniband HBA.
Ubuntu

Using iSCSI On Ubuntu 9.04 (Initiator And Target)

Post date: July 7, 2009, 11:07 Category: Installing Views: 5394 Comments
Tutorial quote: This guide explains how you can set up an iSCSI target and an iSCSI initiator (client), both running Ubuntu 9.04. The iSCSI protocol is a storage area network (SAN) protocol which allows iSCSI initiators to use storage devices on the (remote) iSCSI target using normal ethernet cabling. To the iSCSI initiator, the remote storage looks like a normal, locally-attached hard drive.
Ubuntu

Squid Proxy Server On Ubuntu 9.04 Server With DansGuardian, ClamAV, And WPAD

Post date: July 3, 2009, 11:07 Category: Installing Views: 7440 Comments
Tutorial quote: This tutorial will demonstrate how to set up a Squid Proxy server on Ubuntu 9.04 Server with DansGuardian (for content filtering) and ClamAV (for Virus scanning); in addition, we will set up Web Proxy AutoDetection (WPAD) through DHCP (in this case, the Windows Server 2003 DHCP server) or DNS so that the only configuration necessary on the client side is to check "Auto-detect proxy settings for this network" in Firefox or Internet Explorer. At the end of the tutorial, users will have a fully functional and secure proxy for HTTP access.
Debian

Distributed Replicated Storage Across Four Nodes With GlusterFS On Debian Lenny

Post date: June 30, 2009, 11:06 Category: Installing Views: 4246 Comments
Tutorial quote: This tutorial shows how to combine four single storage servers (running Debian Lenny) to a distributed replicated storage with GlusterFS. Nodes 1 and 2 (replication1) as well as 3 and 4 (replication2) will mirror each other, and replication1 and replication2 will be combined to one larger storage server (distribution). Basically, this is RAID10 over network. If you lose one server from replication1 and one from replication2, the distributed volume continues to work. The client system (Debian Lenny as well) will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86-64 servers with SATA-II RAID and Infiniband HBA.
XenServer+Express

Virtualization With XenServer 5.5.0

Post date: June 28, 2009, 11:06 Category: Installing Views: 12098 Comments
Tutorial quote: This Howto covers the installation of XenServer 5.5.0 and the creation of virtual machines with the XenCenter administrator console. XenServer is a free virtualization platform from Citrix, the company behind the well known Xen virtualization engine. XenServer makes it easy to create, run and manage Xen virtual machines with the XenCenter administrator console. The XenServer installation CD contains a full Linux distribution which is customized to run XenServer.
Debian

Distributed Storage Across Four Storage Nodes With GlusterFS On Debian Lenny

Post date: June 25, 2009, 11:06 Category: Installing Views: 3741 Comments
Tutorial quote: This tutorial shows how to combine four single storage servers (running Debian Lenny) to one large storage server (distributed storage) with GlusterFS. The client system (Debian Lenny as well) will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86-64 servers with SATA-II RAID and Infiniband HBA.
Fedora

Virtualization With KVM On A Fedora 11 Server

Post date: June 21, 2009, 10:06 Category: Installing Views: 3736 Comments
Tutorial quote: This guide explains how you can install and use KVM for creating and running virtual machines on a Fedora 11 server. I will show how to create image-based virtual machines and also virtual machines that use a logical volume (LVM). KVM is short for Kernel-based Virtual Machine and makes use of hardware virtualization, i.e., you need a CPU that supports hardware virtualization, e.g. Intel VT or AMD-V.
CentOS

How To Install Qmailtoaster (CentOS 5.3)

Post date: June 19, 2009, 10:06 Category: Installing Views: 8046 Comments
Tutorial quote: Qmailtoaster is a project that aims to make the installation of Qmail onto RPM based systems a snap. All of the packages are distributed in source RPMs so building the packages for your particular distro and architecture is as easy as running a script or a simple command for each package. The RPMs have all of the needed and commonly asked for patches included so you can have a mail server up and running in about an hour. When it's all complete, you'll have a full Qmail mail server installation ready for just about anything. I personally run Qmailtoaster servers for other companies and ISPs who have tens of thousands of users on their systems.
Debian

High-Availability Load Balancer With HAProxy/Keepalived On Debian Lenny

Post date: June 16, 2009, 10:06 Category: Installing Views: 5224 Comments
Tutorial quote: This article explains how to set up a two-node load balancer in an active/passive configuration with HAProxy and keepalived on Debian Lenny. The load balancer sits between the user and two (or more) backend Apache web servers that hold the same content. Not only does the load balancer distribute the requests to the two backend Apache servers, it also checks the health of the backend servers. If one of them is down, all requests will automatically be redirected to the remaining backend server. In addition to that, the two load balancer nodes monitor each other using keepalived, and if the master fails, the slave becomes the master, which means the users will not notice any disruption of the service. HAProxy is session-aware, which means you can use it with any web application that makes use of sessions (such as forums, shopping carts, etc.).
Fedora

The Perfect Server - Fedora 11 x86_64 [ISPConfig 2]

Post date: June 14, 2009, 11:06 Category: Installing Views: 3841 Comments
Tutorial quote: This is a detailed description about how to set up a Fedora 11 server that offers all services needed by ISPs and hosters: Apache web server (SSL-capable) with PHP5/Ruby/Python, Postfix mail server with SMTP-AUTH and TLS, BIND DNS server, Proftpd FTP server, MySQL server, Dovecot POP3/IMAP, Quota, Firewall, etc. This tutorial is written for the 64-bit version of Fedora 11, but should apply to the 32-bit version with very little modifications as well. In the end you should have a system that works reliably, and if you like you can install the free webhosting control panel ISPConfig (i.e., ISPConfig runs on it out of the box).
Web-based applications and online marketing solutions - LumoLink